How To Fix Your Washing Machine

We all assume that our appliances will be functioning when they are needed. People may even try to ignore a minor issue, hoping it will go away. Unfortunately, small issues can quickly become something more serious and cause major disruption to one’s life.

Fixing a washing machine can be both tricky and time-consuming. It is important to diagnose the problem accurately before attempting any repairs.

Before you start your appliance repair, it is important to associate yourself with some of the typical washing machine problems to better understand the issue and how it can be fixed.

This article will walk you through some of the most common problems and provide some tips to help you fix your washing machine. Continue reading to learn how you can troubleshoot and fix your washing machine.

Common Washing Machine Problems

In some cases, fixing a broken washing machine is as simple as tightening a hose or using basic tools. However, other issues are more complex and may require the expertise of a professional.

Don’t ignore the telltale signs that your washing machine needs a service call. If you are noticing less effective cleaning or persistent leaks after every wash cycle, it is time to take action.

Doesn’t Clean Clothes Properly

If your washing machine is not cleaning clothes properly, the most likely cause is that the machine has not been set to a proper cycle or settings.

Other potential explanations may include the following:

• Overloading: Washer capacity is limited, and overloading the drum can cause clothes not to be thoroughly cleaned.
• Insufficient Detergent: Does your detergent have enough power for the wash load?
• Clogged Filter: The filters of washing machines should be checked regularly, especially if you are using liquid detergents as they may accumulate in the filter over time.
• Broken Drum: A broken drum can cause clothes to not be cleaned properly, as it will fail to agitate the water and detergent in the machine.
• Wrong Wash Cycles: Your washing machine may have a variety of settings and functions, but you need to make sure that the right ones are selected for the job.

Won’t Finish the Wash Cycle

If your washing machine fails to finish its cycle, there are a few potential explanations. These can include:

• Clogged Drain Hose: Make sure that the drain hose connected to the washing machine is not clogged or blocked.
• Timer Problems: If the timer seems to be malfunctioning, it may need to be replaced.
• Issues in the Electrical Components: When a machine moves, it may inadvertently unplug the power cord. It is common sense that a lack of a power source will stop your washing machine from running.
• Overfilling: If the drum of your washing machine is overfilled, water may overflow and cause the machine to shut down.
• Water Leak: If your washing machine does not have a sufficient supply of water coming into your washing machine, this will affect its ability to complete a cycle.
• Lid/Door Switch Problem: Some washing machines have a lid switch that will prevent the machine from finishing its cycle if it is not properly closed.
• Faulty Heating: A faulty heating system can cause the washing machine to shut down before the cycle is complete.
• Drainage Problem: When the drainage hose is not draining properly, the washing machine will not be able to complete its cycle.
• Faulty Connection: If the connection between the power cord and the outlet is loose or faulty, your washing machine may not be able to complete its cycle.

Your Washing Machine Won’t Spin

If your washing machine doesn’t spin, there are a few potential explanations. These can include:

• Clogged Filter: Make sure that the filter of your washing machine is clear and not clogged with dirt or grime.
• Broken Belt: Belts may need to be replaced if they become worn or stretched out over time.
• Damaged Motor: A damaged motor may need to be replaced or repaired if it is not functioning correctly.
• Issues with the Timer: If the timer is not set to the correct setting, the machine will not spin properly.
• Overfilling: Overloading your washing machine can cause it to prevent spinning as a safety precaution.
• Out of Balance: If a load of clothes is uneven, it can cause the machine to become out of balance and not spin correctly.
• Broken Washer Door Seal or Door Frame: A worn or damaged door seal can prevent the spin cycle from initiating.
• Washer Drain Block: If the washer drain is blocked, it will prevent the machine from spinning.
• Faulty Control Board: Another reason that causes your washing machine to fail to spin is a faulty internal component, such as a control board.

Hot Water Inlet Valve is Not Working

If your washing machine hot-water inlet valve is not working, there are a few potential explanations. These can include:

• Faulty Wiring: Check the wiring to the water inlet valves for any signs of damage or corrosion.
• Clogged Inlet Filter: Make sure the filter on the inlet valve is clear and free of debris.
• Broken Valve: If the valve itself is broken, it may need to be replaced.
• Faulty Thermostat: The thermostat on the inlet valve can fail over time, and this will affect how hot the water is entering your washing machine.
• Damaged Seals or Gaskets: Seals and gaskets around the water inlet valve can become worn or broken over time, so they may need to be replaced.
• Faulty Pressure Connector’s Switch: A pressure switch that is not working properly can prevent hot water from entering your washing machine.
• No Hot Water Supply: Make sure that there is an adequate supply of hot water coming into the machine. If there is not, it could be a problem with your water heater or plumbing system.

Noisy Washing Machine Problem

Noisy washing machines can be caused by a few different issues. These can include:

• Misaligned Drum: If the drum is not properly aligned, it may cause loud banging noises during the cycle.
• Faulty Balance Ring: Check for any damage to the balance ring, which can give rise to loud noises from your washing machine.
• Worn Suspension Rods: If the suspension rods which support the drum become worn or broken, it can cause loud noises.
• Loose Parts: Check for any loose parts inside the washing machine that could be rattling around and causing the noise.
• Damaged Drum Bearings: Worn bearings in the drum can cause a grinding noise during the cycle.
• Blocked Drain Pump: If the pump is blocked with debris, it can cause a loud humming noise.
• Outer Tub Obstructions: If an object or piece of clothing is stuck in the outer tub, it can cause a loud rattling noise.
• Faulty Motor Mounts: Worn motor mounts can cause vibrations and loud noises from your washing machine.

Step-by-Step Guide on DIY Washing Machine Repair

When you have identified the problem, it is time to take action. If the issue is a simple one and you feel comfortable enough to repair it yourself, many online resources provide step-by-step instructions on how to fix washing machines.

How to Fix Washer Motor Overheating

Before troubleshooting, ensure that the power source is linked to your washer if it fails to respond when switched on. Electronic components such as relays, timers, motors and switches can overheat due to prolonged use. If your washer motor overheats, here are some of the steps you can take:

• Step 1: Turn off the power. Unplug the washing machine or shut off the circuit breaker that is powering it.
• Step 2: Check for any blockages around the motor. Removing any items that may be obstructing the airflow.
• Step 3: Clean the motor. Use a small brush to remove any dirt and dust buildup around the motor.
• Step 4: Check for worn-out parts or broken wires. Look for any signs of damage or wear and tear in the wiring.
• Step 5: Replace with new parts. If necessary, replace any worn or defective components with new ones.
• Step 6: Reassemble the motor. Once all the parts are back in place, reassemble the motor and switch it on again.
• Step 7: Check for proper functioning. After a few minutes of operation, check that the motor is running correctly and not overheating.

How to Fix Washing Machine Drain Issues

If your washing machine is not draining properly, there could be a few issues causing the problem. To diagnose and fix any drain-related issues, here are some steps you can take:

• Step 1: Check the hose. Ensure that all hoses are connected properly and that no clogs or blockages exist.
• Step 2: Clean the drain pump. Remove any debris or blockages that are preventing proper drainage.
• Step 3: Check the drain filter. Make sure that the filter is not blocked and can move freely.
• Step 4: Replace worn components. If necessary, replace any worn or broken parts, such as seals and gaskets.
• Step 5: Check the water pressure. Ensure that there is an adequate supply of hot water coming into the machine. If there is not, it could be a problem with your water heater or plumbing system.
• Step 6: Reassemble the machine. Once all components are back in place, reassemble the washing machine and switch it on again.
• Step 7: Test the drain system. Run a cycle to check that all features are working as normal and that your washing machine is draining properly.

How to Fix Washing Machine Loud Noises

Do you hear a gurgling noise coming from your washing machine? This could be caused by a partial obstruction in the drain line. To fix this, here are some steps you can take:

• Step 1: Disconnect the power. Unplug the machine or switch off the circuit breaker that is powering it.
• Step 2: Check for any obstructions in the drain line. Ensure no foreign objects are blocking the flow of water.
• Step 3: Clean the pump. Remove any dirt, debris, or buildup that could be interfering with the draining process.
• Step 4: Check the drain hose. Ensure that all hoses are connected properly and that no clogs or blockages exist.
• Step 5: Replace worn components. Substitute any worn or faulty components, such as gaskets and seals.
• Step 6: Reassemble the machine. Once all components are back in place, reassemble the washing machine and switch it on again.
• Step 7: Test for proper functioning. After a few minutes of operation, check that your washer is running smoothly with minimal noise.

How to Fix Washing Machine Spin Cycle Problems

If your washing machine is not spinning properly, it could be because of an issue with the drive belt or motor. To resolve this issue, here are some steps you can take:

• Step 1: Turn off the power. Unplug the washer or switch off the circuit breaker that is powering it.
• Step 2: Check for any blockages around the motor. Removing any items that could obstruct the movement of the belt.
• Step 3: Inspect the pump belt. Look for any signs of wear and tear or damage to the belt.
• Step 4: Replace with new parts. If necessary, replace any worn or defective components, such as bearings and pulleys with new ones.
• Step 5: Reassemble the motor. Once all the parts are back in place, reassemble the motor and switch it on again.
• Step 6: Check for proper functioning. After a few minutes of operation, check that the motor is running correctly and not overheating.
• Step 7: Test the spin cycle. Run a cycle to check that the washer is spinning properly and not making any loud noises.

How to Fix Washing Machine Water Leakage Issues

If your washing machine is leaking water, the most likely cause is a faulty hose or seal. To fix this issue, here are some steps you can take:

• Step 1: Disconnect the power. Unplug the washer or switch off the circuit breaker that is powering it.
• Step 2: Inspect all hoses and seals. Check for any signs of damage, cracks, or leaks.
• Step 3: Clean the hoses and seals. Remove any dirt, debris, or buildup that could be preventing proper drainage.
• Step 4: Replace worn components. If necessary, replace any worn or broken parts, such as hoses and seals.
• Step 5: Reassemble the machine. Once all components are back in place, reassemble the washing machine and switch it on again.
• Step 6: Test for proper functioning. After a few minutes of operation, check that your washer is running smoothly with minimal leakages.
• Step 7: Monitor for further leakage. To ensure that the issue has been completely resolved, monitor the washer over the next few days.

How to Fix a Burning Rubber Smell in a Washing Machine

If your washing machine produces a burning rubber smell, it could be because of an issue with the drive belt. To fix this problem, here are some steps you can take:

• Step 1: Turn off the power. Unplug the washer or switch off the circuit breaker that is powering it.
• Step 2: Inspect the pump belt. Check for any signs of wear and tear or damage to the belt.
• Step 3: Replace with new parts. If necessary, replace any worn or defective components, such as bearings and pulleys, with new ones.
• Step 4: Reassemble the motor. Once all the parts are back in place, reassemble the motor and switch it on again.
• Step 5: Test for proper functioning. After a few minutes of operation, check that the motor is running correctly.
• Step 6: Run a load with no clothes. To determine if the burning smell has been eliminated, run an empty load and check for any odours.
• Step 7: Clean the drum and dispensers. Using a cleaning solution, wipe down all interior surfaces of the washing machine, including the drum and detergent dispensers.
• Step 8: Check for further issues. Keep an eye out for any other signs of malfunction or damage over the next few washes.

How to Fix Troubles in Washing Machine Timer Controls

If your washing machine is having issues with its timer controls, here are some steps you can take to fix the problem:

• Step 1: Turn off the power. Unplug the washer or switch off the circuit breaker that is powering it.
• Step 2: Check for any signs of damage. Inspect all components related to the timer control for any signs of wear and tear or damage.
• Step 3: Replace worn parts. If necessary, replace any worn or defective components, such as timers and switches, with new ones.
• Step 4: Reassemble the machine. Once all components are back in place, reassemble the washing machine and switch it on again.
• Step 5: Test the timer control. Run a cycle and check that the timer is working properly and not missing any cycles or going off too soon.
• Step 6: Adjust the timing if necessary. Make any necessary adjustments to the time settings to get it just right.
• Step 7: Inspect for further issues. Keep an eye out for any other signs of malfunction or damage over the next few washes.

Contact a Professional Technician

If you are still having issues with your washing machine, it is best to contact a professional technician for further assistance. They will be able to inspect the machine and identify any underlying problems that need to be addressed.

In addition, they can also provide advice on how to maintain and troubleshoot your appliance in the future properly. With an experienced team of technicians, you can be sure that your washing machine will be running smoothly in no time.

Conclusion

By following the steps listed above, you can troubleshoot common issues with your washing machine. This will help identify any underlying problems to get it running properly again.

If all else fails, don’t hesitate to contact a professional technician for further assistance. With their expertise and knowledge, they can diagnose and fix whatever issue is preventing your appliance from running smoothly.

If you are from Australia and looking for a professional technician, then you can get in touch with the team of experts at Quality Appliance Repair. We have the knowledge and expertise to handle a wide range of repairs for domestic as well as commercial appliances. From troubleshooting to repairs and maintenance, our technicians are here to help.

To learn more or to schedule a consultation, repair, or installation, please don’t hesitate to reach out to us using the contact details provided below:

• Washing Machine Repairs Melbourne VIC - (03) 9034 6162
• Washing Machine Repairs Perth - (08) 9551 7923
• Washing Machine Repairs Adelaide - (08) 6118 7045
• Washing Machine Repairs Sydney - (02) 6190 1313
• Washing Machine Repairs Brisbane - (07) 3088 9002

Contact us today for a reliable and affordable service.